Monday, November 22, 2010

Multipass Build and Tutorial Complete!

After YEARS AND YEARS of sitting on the project workbench, I have FINALLY finished a complete build up of the Fifth Element MultiPass!

UPDATE: If you are interested in a kit of this prop, I have a few available. Please email me at jablonskyexpress _at_ yahoo _dot_ com.



Check it:





Here is the online tutorial where I document every single step involved in the build up of this kit.

I think I actually started this project sometime around 2003. Don't get me wrong, I haven't been working on it steadily since then! It was definitly birthed in fits and starts. I did a run of pass kits earlier in the year, and just now finally got around to doing a build up of my own. It's been a long road, but I'm very happy with the results. I'm quite confident in saying that it is the best, most accurate multipass available to the collector today. I have seen a few others out there, but they don't come close. Yay!

at

6 comments:

  1. AnonymousAugust 17, 2011 at 7:28 PM

    Have you ever considered building the Korben Dallas blaster? It's my favorite gun from the movie.

    ReplyDelete
  2. MattMunsonAugust 18, 2011 at 6:58 AM

    Yes, the Korben gun is one of my "holy grail" props. I have a really clean casting of a screen used stunt gun, and that keeps me happy for now. But someday I will take a run at it. I have too many other projects going on right now that take priority though :)

    ReplyDelete
  3. Alan MNovember 22, 2011 at 6:13 PM

    I have been searching for a kit lying somewhere in the US for almost a year an a half now, as I want to make this for my wife. Fifth Element being her FAVORITE, and let me stress favorite movie and all, but after nearly 18 months of deep searching, I have come to no avail..and no way of contacting you other than to comment. Would you know where I could get my hands on one?

    ReplyDelete
  4. MattMunsonNovember 23, 2011 at 9:30 AM

    email sent!

    ReplyDelete
  5. UnknownJune 11, 2012 at 3:56 PM

    Hey Matt. I was hoping to create an image for my CapitalOne card by modifying the amazing work you've already done. How can I get at the artwork? I'm a graphic designer so I can use PSD/AI or any other format you might have made it in. Many thanks.

    ReplyDelete
  6. MattMunsonJune 11, 2012 at 10:25 PM

    Hey Matt! Great initials, by the way :D Your best bet is to start from scratch. The artwork I put together for my pass took about four years of research and hard work to perfect, so I hope you'll understand that it's not the type of thing I give away for free. The good news is that there's plenty of great reference available on the web, and I'm sure you'll do a killer job of your custom graphics.

    ReplyDelete